Step 01 : Cut a strip of paper or a piece of string. The paper strip should be approximately 1/2″ wide, and 5″ long.

01-300x225

Step 02 : Wrap the paper or string around the finger to be sized

 

02-300x225

Slide the paper or string up to the knuckle, as the ring must be sized large enough to able to slip off and on, over the knuckle.

Step 03 : Use a pen to mark the string or paper where the long end overlaps.

 

03-300x225

Step 04 : Measure the mark from the end of the length of paper or string with a ruler.Use the metric side for more accurate sizing.

 

04-300x225

Step 05 : Locate your ring size by locating your measurement on below chart. If the measurement falls in between two sizes, it is recommended that you choose the larger size.

 

 

Ring Size Diameter Circumference
4 14.9 mm 46.8 mm
4.5 15.3 mm 48.0 mm
5 15.7 mm 49.3 mm
5.5 16.1 mm 50.6 mm
6 16.5 mm 51.9 mm
6.5 16.9 mm 53.1 mm
7 17.3 mm 54.4 mm
7.5 17.7 mm 55.7 mm
8 18.2 mm 57.0 mm
8.5 18.5 mm 58.3 mm
9 19.0 mm 59.5 mm
9.5 19.4 mm 60.8 mm
10 19.8 mm 62.1 mm
10.5 20.2 mm 63.4 mm
11 20.6 mm 64.6 mm
11.5 21.0 mm 65.9 mm
12 21.4 mm 67.2 mm
12.5 21.8 mm 68.5 mm